Small Block Chevy Engine Assembly Basic Tool Kit

Description

Set ring end gap with this exclusive filer, Anodized aluminum piston ring filing tool covers 4.000" to 4.230", Feeler gauge consists of 22 blades, Quick and easy cam bearing installation tool to remove and replace your cam without damage, Valve spring compressor is designed for changing springs with engine still in the car
Small Block Chevy Engine Assembly Basic Tool Kit
Sku # 9109969
Mfr. Part # 9109969
Condition
New
Brand
Speedway Motors
Sold
Kit
Details
Info
Pick up this basic tool kit to help assemble your next project. Each part is essentail for making sure you get your engine built correctly for maximum reliability and performance. Designed for a small block Chevys these tools will work for 302, 327, 350 and 383 strokers.
Speedway Precision Piston Ring End Gap Filer Tool - Set ring end gap with this exclusive filer. Features carbide grinding wheel and cuts chrome plated stainless steel quickly and accurately. Can be mounted to any work bench.
Disc measures 2.283" O.D. and is .080" thick
Center hole is for a .230" arbor
Replacement Diamond Cut Disc for Ring Filer - Replacement diamond cut grinding disc for ring filer. The disc measures 2-1/4" across and has a 1/4" pilot hole.
Piston Ring Squaring Tool, 4.000 to 4.230 Bores - For checking piston ring end gap. One tool covers 4.000" thru 4.230". Anodized aluminum. Designed to fit inside head studs.
Performance Tool W80524 Valve Lash Feeler Gauges - This precision feeler gauge from Performance Tool features 3" long blades with a .002" step for setting valve lash. The feeler gauge has 22 blades and measures from .004" to .025".
Speedway Adjustable Ring Compressor - Tapered inner face. Hard anodized billet aluminum. Made extra deep with stainless steel adjusting straps for years of dependable service.
Speedway Small Block Chevy SBC Camshaft Cam Bearing Driver - Remove and replace your S/B Chevy and 90° V6 cam bearings without damage to the bearings.
Note: Always remove cam bearings when boiling or cleaning block.
Chevy Camshaft Install Tool - It's not too bad putting a Chevy cam in about 3/4 of the way. That's when you get shaky and start nicking the cam bearings. This tool bolts on the end of the cam and gives you the control to do the job right. Works great for taking the cam out too. This product is for non-roller camshafts.
Small Block Chevy Crank Socket for Degree Wheel - By removing the crank hub or balancer and using this tool, engine builders have a positive way to turn over the engine. Broached keyway allows 1/2" socket to slide over crank snout and key. Giant knurled jam nut positions degree wheel. Use with 11" degree wheel.
Moroso 62050 Dial Indicator Stand - Spans cylinder bores up to 4-7/16" and makes it easy to check piston dome and deck height. Can also be used to check flatness runout, warping, etc. Dial indicator not included.
Spans cylinder bores up to 4-7/16"
Makes it easy to check piston dome and deck heights
Block and head surface problems can be found by the racer who checks everything
Other uses include checking for flatness, runout, warping, etc.
Speedway Motors Dial Indicator - 2-3/8" diameter face, measures in .001" increments. Probe has 1" stroke. Includes a bracket on the back.
Top Dead Center Indicator - Positive stop to locate top dead center. A must for cam checking with heads on. For 14 mm plug thread. Stop bolt thread 3/8"-16
Proform 66784 Valve Spring Compressor - For changing springs with engine still in the car. Screws on to 3/8" and 7/16" rocker studs. Locks into the down position so you can work with both hands.
Kit Includes:
(1) Speedway Precision Piston Ring End Gap Filer Tool
(1) Replacement Diamond Cut Disc for Ring Filer
(1) Piston Ring Squaring Tool, 4.000 to 4.230 Bores
(1) Performance Tool W80524 Valve Lash Feeler Gauges
(1) Speedway Adjustable Ring Compressor
(1) Speedway Small Block Chevy SBC Camshaft Cam Bearing Driver
(1) Chevy Camshaft Install Tool
(1) Small Block Chevy Crank Socket for Degree Wheel
(1) Moroso 62050 Dial Indicator Stand
(1) Speedway Motors Dial Indicator
(1) Top Dead Center Indicator
(1) Proform 66784 Valve Spring Compressor
Charts
Specs
Sold in Quantity
Kit
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 70 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.