-40%
SL-LMX-17010 Xtreme Loco magnets 2ea with 3M pads FOR LGB TRAINS >> LGB 17010
$ 9.76
- Description
- Size Guide
Description
SL-LMX-17010 Xtreme Loco magnets (2)
and 3M adhesive
pads (2) FOR LGB TRAINS NEW
G Scale Xtreme Loco magnets (2
)
and 3M adhesive
pads (2)
SL 4227010
SL-LMX-17010
Neodymium Rare Earth Magnets - Xtreme Power - MADE IN USA
Compatible to and more powerful than
the LGB 17010 magnet
Small size and superior strength fits on locos where the LGB 17010 and Massoth 8420102 magnets do not.
Compatible with our SL-TC-17100 & SL-TC-17100-nt-xx track contacts as well as LGB's 1700 & 17100 track contacts .
Buy it now price:
.49 (two loco magnets) New
Questions? contact us by clicking on the link below
SL-LMX-17010
for larger photos, how to wire and product details
These Xtreme power rare earth magnets will trigger track contacts up to 5 cm (~2 inches). Like the original LGB magnets, they are polarized so that one of the sides is North while the other is South. This is the reason that other magnets do not work with track contacts.
Features:
Dimensions: 21.2L x 25.2W x 4.2H mm (.83"x1"x.065")
Height includes the 3M pad which is 5.8 mm (.22")
Works with LGB, Aristo Craft, Bachman, USA and other manufacturer's locomotives
2 each Loco magnets
2 each 3M adhesive strips for attaching magnets to locos
Made in the USA (manufactured and assembled in the USA from USA raw materials)
Each magnet contains a north and south rare earth magnet (under the raised areas at one side of the mounting plate) with a field magnification plate to increase the field strength and the rare earth magnets are each nickel plated,
coated with
primmer and three coats of water proof and rust resistant enamel.
Each magnet has a 3M outdoor adhesive pad on its back for easy attachment to any desired surface.
No tools are required to install.
Comparison to other loco Magnets:
The LMX Xtreme power loco magnet has up to 2X the strength of other loco magnets as shown above while having the smallest possible size to allow flexible placement.
Notice the small size allows easy placement outside the 'loco magnet' area and between the two motor block screws.
Easy to install
:
takes less than 60 seconds!
The animated sequence shows the steps to install
Detailed step by step instructions:
The SL-LM-17010 Loco Magnet will fit on the bottom of any G scale Loco or car by mounting so the two dots are facing down and parallel to your railroad ties..
On the flat side of the
SL-LM-17010 Loco Magnet
there is an adhesive pad with red protective cover.
Peel the red backing off the adhesive pad as shown
Remove and discard the red protective cover
Press the LMX to the desired locaiton on your loco or car. Reposition easily if you change your mind by lifting the magnet off and relocating.
Note that this loco magnet fits in locations and on locos where the LGB and Massoth magnets do not fit as shown above. The magnet can be located in the recessed area on some locos but best placement is away from the locos motor, so placement outside this area is best for maximum field strength.
The LMX magnet is stronger than all other loco magnets so it can be placed a greater distance from your track contacts to allow use on cars as well as greater
placement
flexibility.
Run your trains! Use the LMX loco magnet to automate your railroad by activating switches, signals, sound effects or signaling a central station or PC to perform other actions. (Train and track not included with magnets).
Automate lighting and sound effects using our SL-TC-1705 Track Contracts to trigger special effects as shown below. (Animated Santa available as a separate item from the Shourt Line eBay Store or email us below)
Made in the USA - 100% satisfaction guaranteed.
For indoor or outdoor use.
SL-LMX-17010
for larger photos, how to wire and product details
Questions? contact us by clicking on the link above
Thanks for looking - Shourt Line by Soft Works Ltd.
copyright 2021 ShourtLine.com - Soft Works Ltd. all rights reserved