Sidewinder™ Universal 1/4" Molded Fuel Line Rubber Hose Elbow 45 90 180 Curved

Description

Now you can create your own molded fuel and oil lines using our custom shaped "Sidewinder" hoses.  This hose is made to exceed J30R7 spec and is safe for use with gasoline or E85 up to 75 PSI.  The hose is molded to shape to include commonly needed bends which eliminate kinking.  Simply cut the portion out that you need to create 45, 90, 135, and 180 degree bends.  Attach to a tube or hose barb in your application using appropriate hose clamps.
Reinforced molded rubber hose for carburetors and fuel injection systems with up to 75 PSI working pressure.  This will fit 1/4" and 6.35mm hose barbs and hard fuel supply lines from tanks to carburetors, return lines, etc.  You can cut any section out of this hose and use any part of it, just trim to length or shape and tighten with hose clamps (clamps not provided).  If desired, any printing on the hose can be wiped away with lacquer thinner for a cleaner look.
** Cannot be submerged in fuel tank! **
Dimensions:
Inner Diameter: .250" (6.35 mm)
Outer Diameter: .5"
Overall Dimensions: 7.5" x 4"
Specs:
Part Number: RMI-33007
Built to SAE J30R7 For Permeability
Working pressure: 75PSI
Burst Pressure: 250 PSI
Temperature Range: -40°F to +257°F (-40°C to +125°C)
Applications: Fuel Injection, Low Pressure Gasoline, Diesel, Ethanol E10, E85, PCV Emissions Hose, Oil