FIELDPIECE HVAC HVACR ATH4 DUAL TEMPERATURE HEAD + ET2W WIRELESS TRANSMITTER

Description

TESTING & COSMETIC NOTES:
This is a USED WORKING item in GOOD cosmetic condition that WAS PULLED FROM A WORKING ENVIRONMENT and is GUARANTEED WORKING AS DESCRIBED
Batteries and thermocouples not included; only what is photo'd is included.
COMPONENTS INCLUDED IN THIS AUCTION:
• (1) - FIELDPIECE ATH4 DUAL TEMPERATURE MEASUREMENT HEAD ACCESSORY HVAC-R HVACR PROFESSIONAL-GRADE FIELD SERVICE INSTRUMENT
• (1) - FIELDPIECE ET2W WIRELESS TRANSMITTER 100FT RANGE
REPLACEMENT GUARANTEE - ITEM IS GUARANTEED WORKING AS DESCRIBED:
Please see our test notes above for further information. Our descriptions, and photos represent our best effort to relay all pertinent information about a product. We assure the buyer that they will receive an item with the level of operation shown in the photos and described in our Test and Cosmetic notes. When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee. We do not refund the shipping charges because we are unable to recoup these costs.
ADDITIONAL INFORMATION:
The following information is supplied by the Manufacturer and describes this product in general:
The Fieldpiece Dual-Temperature Accessory, model ATH4, measures two temperatures simultaneously using the included k-type, wrap tab beaded thermocouples. The technology inside the ATH4 provides superior temperature compensation in rapidly changing environments commonly found while performing field service. Use the ATH4 to find Delta T and just about any temperature split you want to measure. Displays T1, T2 and T1-T2 on your Fieldpiece meter, handle or data logger. It is included with the HVAC Guide System Analyzer to get target superheat and for the Target Evaporator Exit Temperature test. Fieldpiece offers a wide variety of k-type thermocouples for various HVAC specific applications. Use pipe clamp T/Cs with the ATH4 to check for blocked filters. Use wet and dry bulb thermocouples to find target superheat.
Designed for HVAC/R, the Dual-Temperature Accessory, model ATH4, measures two temperatures and calculatesthe difference in English or metric units.
Field calibration for 1F accuracy
Displays F directly at 0.1F resolution on DMM with 0.1mVDC resolution
Select F or C
Converts from -50F to 1800F (optional thermocouple required for 1800F)
Includes two wrap tab thermocouples plus velcro straps. Thermocouples insulated to 400F
Auto-off can be disabled for data logging
Please Click Here to Visit Our Store
SearchBy37 -
199245
| Loc: G96 | L: Jack | T:
| PM: ROB PM
| QTY: 0 | Plan: N- Q3 or more 1 pound w/Free Shipping | 14.00"x8.00"x6.00" 2.00lbs | Start: {{detail_product_description}}.00 | BIN: .97 |  | 5/22/2018 |
|
185274