2.5" x 5" 200W 220V Keenovo Silicone Engine Block Oil Pan Heater +50C Thermostat

Description

Hi, this listing is for a brand new KEENOVO  Silicone Heater with the following Specifications:
Silicone Heater Pad/Mat
Size: 63.5mm X 127mm  (2.5" X 5")
Power: 200W @ 220V
Accessories:
1m power cable,exit from center of short side
3M adhesive backing
Built-in pre-set thermostat of 50 Deg C
Qty: 1 pc
Description:
Rated at
16 watts
per square inch with super fast and even heating, this versatile pad serves perfectly in various applications as an excellent heat source. One typical example is as an engine oil pan heater to give your car a warm start in a freezing winter morning.
Designed for overnight heating. With the built-in thermostat, there is no worries of over heating. Just plug the heater and leave it overnight, your car engine shall be waiting for you
warm
in the morning. A warm engine will sharply reduce idling, fuel consumption, and exhaust gas.
It's built tiny and suits a great variaty of cars. 3M adhesive backing offers easy and great mounting.
Keenovo carries a full range of standard and custom designed silicone heaters, contact us if you need a special heater made for your machine.
Mounting Instructions:
Clean the surface. It's preferred to remove the paint or any contaminants by sanding the oil pan to bare metal.
Pre-warm the oil pan by running the engine if it's too cold.
Peel off the backing paper in brown color, apply the pad to the surface cleaned making sure no gap or air bubbles trapped under the pad.
Seal the edges of the pad with high temperature silicone RTV sealant.
Secure the power wires up.
The last picture on this listing is included
ONLY
to show you a great
EXAMPLE
of a perfect mounting.
Important Notes:
120V available, 220V by default for this listing.
The thermostat,being mechanical (bi-metal and snap action), should not be considered as a precise temperature control device, but
as an auto-regulating and over-heat protection device. Its action temperatures may be subjected to certain tolerances.
Caution! This pad heats up SUPER fast. It could rocket to over 100 Deg C in seconds before the thermostat engages, so please NO heating when there is nothing to absorb the heat smoothly.
Any questions, message us. Response within 24 hours guaranteed.
~ Welcome to KEENOVO Custom Flexible Heater Store ~
Why KEENOVO?
——
KEENOVO is where best raw materials meet with finest craftsmanship.
As one of the first manufacturers of flexible heaters( Silicone Heaters & Kapton Heaters) in China, we understand that the reliability of our heating elements for your devices,equipment or machines can NEVER be OVER-emphasized,thus we offer best quality at reasonable prices with the following promises:
Keenovo uses ONLY Arlon silicone rubber substrate made in the United States or authentic DuPont kapton film in heater manufacturing to ensure the best heating performance and the longest service life, especially in applications which require a long time heating process at extremely high temperatures.
Keenovo offers FREE assistance in heater design to achieve an ideal thermal heating solution for your application.A general idea of what you want is enough to turn our flexible heater design experts on working for you.
Each and every Keenovo heater is factory inspected before delivery to you.
It's electricity AND heat you are coping with.
KEENOVO is absolutely your right choice with 100% guarantee of high quality.
Custom Design Welcome.
Looking for a flexible heater for your unique application?
Bingo! You just
found
the right people to do the right thing for you. J
ust tell us about your requirements/applications and
leave the rest to Keenovo for an ideal specific heating solution.
Best Quality Guaranteed!
General Introduction of Silicone Heater
Durable and precise, silicone rubber heaters are the most widely used flexible heaters and available in a virtually unlimited range of configurations and geometry's. Silicone rubber heaters provide highly efficient heat transfer over a wide temperature range(-50 Deg C ~260 Deg C).
Lightweight and flexible, they provide superior surface conformance that extends heater life by minimizing the gradient between heating element and heat sink. In addition,
silicone rubber heaters are dimensionally stable and chemical resistant. They can be designed
with multiple heating, shielding and power levels.
Thermostats can be incorporated in a heater for optimum response time and gradient control. Sensors can be integrated inside a heater, adhered to the heater surface, or installed at specific
locations within the system to prevent over temperature.
Features:
Quick heat transfer
Moisture and chemical resistant
Thin
Flexible
Solidly built
Adheres to almost all surfaces
Technical Data of Silicone Heaters
Supply Voltage: 0~400 V, 1 or 3 phase
In
sulation Material: Fiberglass reinforced Silicone Rubber
Max. Operating Temp.: 260 Deg C or 500 Deg F
Min. Element Temp.: -50 Deg C or -58 Deg F
Max.Power Density: 5 w/sq.cm depending on application
Resistance Tolerance: about +/- 5%
Standard Thickness: 1.5 mm
Flammability: Flame Retardant
Moisture Absorption: Moisture proof
Thermal Protection & Control: On board thermal fuse, thermostat, thermistor and PT100 are available as part of your thermal management solution.
Power Leads: 1 meter by default,
other length available upon request
*Note:
Due to the great variety of sockets in the world, we do not include a socket for the heater,unless stated otherwise in the listing.We believe it's more practical to not include the cost of plug in the item and leave you the choice of a proper/suitable socket which conforms to your local standards. We do have EU and US standard plugs, and they are available upon request with a tiny extra charge.
About Shipment and Delivery
Production process usually takes us 5~10 working days( in China) after the date of payment confirmation.
Orders are shipped
to eBay confirmed order addresses. If drop-ship needed, please confirm with us.
Items with a Free shipping is delivered
via China Postal Air Mail with a tracking number.
Express delivery may be carried out by TNT, DHL, FedEx,UPS, or EMS according to the specific conditions in the destination country.
About Warranty
Warranty of one year is offered.
Mal-functions due to mis-use or man made damages are not included in this warranty.
Every and each item is tested and made sure in good condition before shipment.
Due to manufacture reasons, stains on surface do not affect the function and life time.
About Feedback
Customer satisfaction of our items and service is the ultimate goal of our endeavor.
If you are satisfied, please kindly leave us a positive feedback.
If we fail to make you happy, please contact us before leaving negative feedback. We will solve the problem for you as soon as possible.
Happy buying with KEENOVO :)